Acoustic Multi - Yamaha Magicstomp Effect List

Acoustic Multi

Multi effect for electric-acoustic guitar.
Parameter Display
Mic Type TYPE
Blend BLND
Bass BASS
Middle MID
Treble TRE
Presence PRE
Volume VOL
Stereo STE
Bass Freq. BASF
Middle Freq. MIDF
Treble Freq. TREF
Presence Freq. PREF
Limiter LMSW
Chorus/Delay ETYP
Reverb Type RTYP
Limiter Level LIM
Speed/Time SP/T
Depth/FB. D/FB
Effect Level ELVL
Reverb RLVL
What is TAP?
The "Tap" parameter found in delay effects is the timing at which the delay sound is taken out of the delay loop.
To illustrate this function, the delay shown below is using a delay time setting of 360msec. However, with the
"Tap" parameter set to 60, the first delay sound will be heard at 216msec. This happens for the first delay sound
only. If the Feedback (FB.) level is increased, all subsequent delay sounds will be heard at 360msec. intervals.
Range
Condenser1, Condenser2,
Dynamic1, Dynamic2, Tube1,
Tube2, Nylon String1,
Nylon String2
0.0 to 10.0
-12.0 to 12.0 dB
-12.0 to 12.0 dB
-12.0 to 12.0 dB
-12.0 to 12.0 dB
0.0 to 10.0
0.0 to 10.0
50 Hz to 400 Hz
200 Hz to 1.80 kHz
600 Hz to 4.80 kHz
2.00 k to 16.0 kHz
Off, On
Off, Chorus, Delay
Off, Hall, Room, Plate
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
Delay Circuit
TAP=60%
216msec
TAP=100%
360msec
Microphone simulator type
Balance between mic simulator and direct sounds
Low frequency level
Mid frequency level
High frequency level
Extremely high frequency level
Volume
Setting for stereo mic effect
Frequency for low frequency EQ
Frequency for mid frequency EQ
Frequency for high frequency EQ
Frequency for extremely high frequency EQ
Limiter switch
Effect type
Reverb type
Limiter level
Chorus effect speed/delay time
Chorus effect depth/delay feedback
Effect level
Reverb level
First Delay Sound
Original Sound
216 360
msec msec
31
Description
Feedback Delay Sound
TIME
360
msec