M.band Dyna.; Dyna. Filter; Dyna. Flange - Yamaha Magicstomp Effect List

M.Band Dyna.

3-band dynamics processor, with individual solo and gain reduction metering for each band.
Parameter Display
Slope SLOP
Low Gain LO.G
Mid Gain MI.G
High Gain HI.G
Lookup LKUP
Ceiling CEIL
L–M Xover L-MX
M–H Xover M-HX
Presence PRE
Comp. Bypass COMP
Comp. Threshold CMPT
Comp. Ratio CRAT
Comp. Attack CATA
Comp. Release CREL
Comp. Knee CKNE
Exp. Bypass EXP
Exp. Threshold EXPT
Exp. Ratio ERAT
Exp. Release EREL
Lim. Bypass LIM
Lim. Threshold LIMT
Lim. Attack LATA
Lim. Release LREL
Lim. Knee LKNE

Dyna. Filter

Filter effect. The effect changes according to input level.
Parameter Display
Type TYPE
Decay DCY
Direction DIR
Sense SENS
Offset OFST
Resonance RESO
Level LVL
Mix MIX

Dyna. Flange

Flanger effect. The effect changes according to input level.
Parameter Display
Decay DCY
FB. Gain FB
Direction DIR
Sense SENS
Offset OFST
LSH Freq. LSHF
LSH Gain LSHG
EQ Freq. EQ.F
EQ Gain EQ.G
EQ Q EQ.Q
HSH Freq. HSHF
HSH Gain HSHG
Mix MIX
Range
–6, –12 dB
–96.0 to +12.0 dB
–96.0 to +12.0 dB
–96.0 to +12.0 dB
0.0 to 100.0 ms
–6.0 to 0.0 dB, Off
21.2 Hz to 8.00 kHz
21.2 Hz to 8.00 kHz
–10 to +10
Off, On
24.0 to 0.0 dB
1:1 to 20:1
0 to 120 ms
6 to 11500 ms
0 to 5
Off, On
–54.0 to –24.0 dB
1:1 to ∞:1
6 to 11500 ms
Off, On
–12.0 to 0.0 dB
0 to 120 ms
6 to 11500 ms
0 to 5
Range
Low Pass Filter, High Pass Filter,
Band Pass Filter
6 to 46000 ms
Up, Down
0 to 100
0 to 100
0 to 20
0 to 100
0 to 100%
Range
6 to 46000 ms
–99 to +99%
Up, Down
0 to 100
0 to 100
21.2 Hz to 8.00 kHz
–12.0 to +12.0 dB
100 Hz to 8.00 kHz
–12.0 to +12.0 dB
10.0 to 0.10
50.0 Hz to 16.0 kHz
–12.0 to +12.0 dB
0 to 100%
Filter slope
Low band level
Mid band level
High band level
Lookup delay
Specifies the maximum output level
Low/mid crossover frequency
Mid/high crossover frequency
For positive values, the threshold of the high band is lowered and the
threshold of the low band is increased. For negative values, the oppo-
site will occur. When set to 0, all three bands are affected the same.
Compressor bypass
Compressor threshold
Compressor ratio
Compressor attack
Compressor release time
Adjusts the width of the gain curve just above the compressor's thresh-
old
Expander bypass
Expander threshold
Expander ratio
Expander release time
Limiter bypass
Limiter threshold
Limiter attack
Limiter release time
Adjusts the width of the gain curve just above the limiter's threshold
Filter type
Filter frequency change decay speed
Upward or downward frequency change
Sensitivity
Filter frequency offset
Filter resonance
Output level
Mix level
Decay speed
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Upward or downward frequency change
Sensitivity
Delay time offset
Low shelving filter frequency
Low shelving filter gain
EQ (peaking type) frequency
EQ (peaking type) gain
EQ (peaking type) bandwidth
High shelving filter frequency
High shelving filter gain
Mix level
9
Description
Description
Description