Page 2
Compliance with FCC regulations does * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. CANADA This Class B digital apparatus complies with Canadian ICES-003.
Please make sure that benches are stable and any optional fixtures (where appli- cable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recom- mended.
Thank you for purchasing the Yamaha MAGICSTOMP. To get the most out of this product, we urge you to thoroughly read this manual before use. Also, please keep the manual in a safe place for future reference. Contents Precautions ... 6 Package Contents ...
• Power Adaptor * ... 1 • USB Cable ... 1 * May not be included depending on your particular area. Please check with your Yamaha dealer. CAUTION • Before breaking the seal on the CD-ROM package, please carefully read the “Software Licensing Agreement”...
This function lets you fully customize your MAGICSTOMP. [Yamaha DSP Technology Delivers a Wealth of Effects] • In addition to the “Acoustic Multi” effects found in the Magicstomp’s Acoustic Multi preset patches, the unit also features 63 additional effect types. Effects are produced using a powerful 32-bit DSP designed by Yamaha.
Component Names & Functions Top Panel Rear Panel When monitoring through a pair of headphones, make sure you properly adjust the volume so as not to damage your hearing. o !0...
Page 9
q Display Displays information for the currently selected patch or operating conditions of the MAGICSTOMP. w CONTROL Knobs These are used to control patch parameters. (→ page 14) e VOLUME Knob Controls the overall output volume of the MAGICSTOMP. (→ page 12) r STORE/EXIT Button This button is used to store edited patches in the MAGICSTOMP (→...
• The MAGICSTOMP automatically switches “ON” when power is connected and supplied to the device. • Connect an acoustic guitar/electric acoustic guitar or any line level instrument such as a syn- thesizer, etc., to the INPUT jack. The MAGICSTOMP can also be connected to the effect loop of an amplifier, mixer, or other similar device.
Page 11
● Using the MAGICSTOMP with a guitar or other instrument Connecting to an amplifier, etc. (monaural) INPUT L/MONO * The AC adaptor’s shape will vary according to the country to which the device is shipped. Power Adaptor Electric Outlet ● Using the MAGICSTOMP in an effect loop Power Adaptor Electric Outlet...
Using the MAGICSTOMP The MAGICSTOMP comes loaded with a variety of effect patches (programmed effects). First, give some of the presets a try and see what’s available. Turn on the amplifier and play You’ll hear the currently selected patch. Use the MAGICSTOMP’s VOLUME knob to adjust the MAGICSTOMP’s output volume. Patch No.
Page 13
The other way to select patches is with the [Performance Mode]. In this mode, the –, +, and AFR/ON/OFF switches are used to select one of three adjacent patches. To enter the Performance Mode, press and hold any two switches (from –, +, and AFR/ON/OFF).
[Fig. 3] * When the AFR function is switched OFF( page 23) and/or a patch with an effect type other than “Acoustic Multi” is selected, the “ , ” icons will be replaced with “ , ” icons.
OK, now try and edit a patch to your liking. * For more information on parameters of individual effects, refer to the separate “Effect List” sheet. * Parameters for the patch(effect) can only be adjusted when the MAGICSTOMP is in its normal operating mode (when a patch is selected and the effect is switched "ON").
Page 16
Create your own sound Use the +/– switches to select the parameter setting display. Parameters for the currently selected patch are arranged on several pages. Use the “+” or “–” switches to view the next or previous page on the display. * For more information on individual parameters, refer to the separate “Effect List”...
Page 17
Assigning parameters to the unit’s control knobs Parameters that are controlled by the unit’s control knobs during normal operation are as- signed to the control knobs in the upper portion of the parameter page display (shown below: the page before ).
Saving Patches Storing edited patches (STORE) The MAGICSTOMP lets you store your original patches in its User Patch memory (U01-U99). After creating a patch you like, use the following procedure to store the patch. * Patches can not be stored in the Preset Patch memory (P01-P99). * The volume knob’s setting is not stored with patch data.
Page 19
Saving the data to a different patch number After you’re done editing, press the [STORE/EXIT] button. Select the patch number to which you want to save the data. Use the – or + switches to select the destination patch number to which you want to save your data.
Giving the patch a name Giving the patch a name (Name Edit Mode) You can use up to 12 characters when making a name for a User Patch. * Names of Preset Patches (P01-P99) can not be changed. Press the [STORE/EXIT] button. “PRESS[STORE]1sec”...
Page 21
Up to 12 characters can be used in a patch name. * Only 11 characters are displayed when the USB connection is used. After you’ve changed the name, press the [STORE/EXIT] button. The MAGICSTOMP is now in store standby mode. Press and hold the [STORE/EXIT] button (about 1 second) until “NOW STOR- ING...”...
Auto Feedback Reduction (AFR) Function The MAGICSTOMP is equipped with a highly sophisticated Auto Feedback Reduction function (AFR) to eliminate feedback (howling). * In this case, “Feedback” is when a specific frequency produced by the amplifier causes the guitar to resonate uncontrollably, creating a howling sound.
To switch the AFR Function OFF, follow the instructions below and change the setting to “AFR FUNC- TION OFF”. When the AFR Function is switched OFF in a patch that uses the “Acoustic Multi” effect type, the switch will operate as an effect ON/OFF switch, the same as when used with other effect types.
Tuner Mode This mode is used for tuning your guitar. In the Tuner Mode, the MAGICSTOMP functions as a chromatic tuner. * The signal from the MAGICSTOMP’s OUTPUT jack and PHONES jack is muted when in the Tuner Mode (no sound will be produced).
Factory Set Restoring the factory defaults Hold down both the AFR/ON/OFF switch and [STORE/EXIT] button then plug in the power adaptor connected to the unit, and “FACTORY SET” will appear in the display. Press the + switch and the display will ask for your confirmation. * Pressing the –...
Editing Patches with a Computer In the CD-ROM that came with your MAGICSTOMP you’ll find some patch files (library file format) that contain patches other than those found in the MAGICSTOMP’s Preset Patches (P01-P99). You can select any of the patches you like from the library and trans- fer them to the MAGICSTOMP’s User Patches (U01-U99).
Data Flow • Use the supplied USB cable to connect the USB jack on your computer (Windows or Macintosh) to the MAGICSTOMP’s USB jack. • The “Sound Editor for MAGICSTOMP” application found in the accompanying CD-ROM can be used to edit MAGICSTOMP patches or transfer patch data between the MAGICSTOMP and your computer.
Patch Library Sample *1 These applications are supplied with online/PDF manuals. *2 Unfortunately, Yamaha makes no guarantee concerning the stability of these programs nor can it offer user support for them. Minimum System Requirements The system requirements below may differ slightly depending on the particular operating system.
Page 29
Installing Acrobat Reader PDF files (***E.pdf) for the Sound Editor for MAGICSTOMP Owner’s Manual and installation guides for the accompanying application or drivers, plus the MAGICSTOMP Effect List are all found in the accompanying CD-ROM “Manual” folder. In order to view these PDF files, you’ll need to install Acrobat Reader. Follow the steps described below to install “Acrobat Reader”.
Patch Library Sample *1 These applications are supplied with online/PDF manuals. *2 Unfortunately, Yamaha makes no guarantee concerning the stability of these programs nor can it offer user support for them. Minimum System Requirements The system requirements below may differ slightly depending on the particular operating system.
Page 31
Installing Acrobat Reader PDF files (***E.pdf) for the Sound Editor for MAGICSTOMP Owner’s Manual and installation guides for the accompanying application or drivers, plus the MAGICSTOMP Effect List are all found in the accompanying CD-ROM “International” folder In order to view these PDF files, you’ll need to install Acrobat Reader. Follow the steps described below to install “Acrobat Reader”.
Error Messages One of the following messages may appear in the MAGICSTOMP’s display if an error occurs during operation. If so, please stop operation and check the following points to find a solution to the problem. Trouble Shooting • No Sound Is the power adapter properly connected? Is the volume control on the instrument connected to the INPUT jack turned up? Is the volume knob set to “0”?
The following is a legal agreement between you, the end user, and Yamaha Corporation (“Yamaha”). The enclosed Yamaha software program is licensed by Yamaha to the original purchaser for use only on the terms set forth herein. Please read this licensing agreement with care. Opening this package indicates that you accept all terms outlined herein.
Need help?
Do you have a question about the Acoustic and is the answer not in the manual?
Questions and answers