Fluke NetTool Quick Reference Manual page 37

After defining and uploading
the lists using NetTool Toolkit
PC software, NetTool
displays the catalogs using
the names you gave them.
Select Ping Catalog
from the Toolkit menu.
Select one of the
catalogs by highlighting
it then pressing Select.
The list of IP addresses
displays with a status
icon to the left. Ping
results display when you
highlight and select one
of the IP addresses.
To ping the list of IP
addresses again
highlight and select
Restart.
Check NetTool Setup to
see how to edit a list of
addresses.
Running
Ping Complete
Problem with the ping. Corresponds with the
severity level of problems.
Low - one packet lost.
Medium - two packets lost.
High - three packets lost or device not
found.
afq61s.bmp
afq45s.bmp
afq49s.bmp
afq50s.bmp
33