Advertisement
Quick Links
The NX2 Pocket Toner lets you quickly do tests
for continuity, short circuits, ac and dc voltage,
and 50
adapters let you use the toner on cable with
F-type connectors. Optional adapters let you
use the toner on twisted pair, coaxial, and
two-wire radial cable.
The optional Dial Tone Detective
quickly see if a dial tone is present at a
telephone jack and if the polarity of the wires
is correct.
Symbols
W
Warning or Caution: Risk of damage to
or destruction of equipment or software.
See explanations in the manual.
X
Warning: Risk of electrical shock.
Conforms to relevant Australian
standards
*3968817*
PN 3968817 January 2011, Rev. 4 8/2017
©2011, 2017 Fluke Corporation. Pocket Toner
81™, and Dial Tone Detective™ are trademarks of Gale
Corporation.
NX2 Pocket Toner
or 75
termination. The standard
Users Guide
lets you
™
, Speed
®
®
Advertisement
Related Manuals for Fluke NX2
Summary of Contents for Fluke NX2
- Page 1 NX2 Pocket Toner ® Users Guide The NX2 Pocket Toner lets you quickly do tests for continuity, short circuits, ac and dc voltage, and 50 or 75 termination. The standard adapters let you use the toner on cable with ...
- Page 2 Conformite Europeene. Conforms to the requirements of the European Union and the European Free Trade Association (EFTA). Listed by the Canadian Standards Association, CSA C22.2 No. 61010.1.04 Do not connect this equipment to public communications networks, such as telephone systems. See the warning below.
-
Page 3: Auto Shut-Off
Features Speaker Test port Display Power Adapter Main unit Battery cap Speed 81 coupler* Toner cap * F-type coupler that helps you make connections faster. Auto Shut-Off The main unit turns off if the condition of the line does not change for 10 minutes. - Page 4 How to Use the Toner For unterminated cable, connect the correct adapter to an ID cap or the toner cap, then connect the cap to the far end of the cable. Connect the correct adapter to the main unit. Turn on the main unit, then connect it to the near end of the cable.
- Page 5 How to Detect Dial Tones Connect the optional Dial Tone Detective to a telephone jack. To hear a tone when a dial tone is present, use the Speed 81 coupler to connect the toner cap to the Dial Tone Detective. If there is a dial tone, the green LED is on.
-
Page 6: Maintenance
Use only replacement parts that are approved by Fluke Networks. If you replace parts that are not specified as replacement parts, the warranty will not apply to the product and you can make the product dangerous to use. -
Page 7: Specifications
Cleaning Caution To prevent damage to the display or the case, do not use solvents or abrasive materials. To clean the case, use a soft cloth that is moist with water or water and a weak soap. Specifications Approximate distance: 300 m (1,000 ft) Output voltage in continuity mode: 3.6 Vdc (with a new battery) Toner frequency: Main unit: 2.7 kHz. -
Page 8: Contacting Fluke Networks
Contacting Fluke Networks www.flukenetworks.com info@flukenetworks.com 1-800-283-5853, +1-425-446-5500 Fluke Networks 6920 Seaway Boulevard, MS 143F Everett WA 98203 USA Fluke Networks operates in more than 50 countries worldwide. For more contact information, go to our website. - Page 9 LIMITED WARRANTY AND LIMITATION OF LIABILITY Fluke Networks mainframe products will be free from defects in material and workmanship for one year from the date of purchase, unless stated otherwise herein. Parts, accessories, product repairs and services are warranted for 90 days, unless otherwise stated.