Wiremap - Fluke NetTool Quick Reference Manual

Wiremap

When both ends of a cable cannot be connected to
NetTool (e.g., one end is in wiring closet), use the
external wiremap function.
Attach the near end of the cable to the NetTool.
Attach the wiremap adapter to the far end of the
cable.
Power up NetTool.
AutoTest flashes.
Press Select.
Highlight the Wiremap
icon and press Select.
If pin configuration
checks out and there
are no opens, shorts or
split pairs, you can rule
out the cable as the
cause of a problem.
6
afq33s.bmp
afq34s.bmp