Adjusting Emissivity - Fluke Ti20 User Manual

Ti20
Users Manual

Adjusting Emissivity

The amount of infrared energy radiated by an object depends on emissivity and
temperature. The emissivity depends on the material and its surface characteristics. For
more accurate readings adjust the emissivity value for the type of material you are
measuring. See Appendix C for typical emissivity values of various metallic and
non-metallic sources.
As emissivity changes, the live thermal image will also change as the displayed
temperature changes. The default emissivity setting is 0.95 and the adjustmentment range
is from 0.01 to 1.00.
3-4
3. Press F (4) to move the selection to the left or H (5) to move the selection to
the right.
4. Press G ( ) to make your selection and return to the Home display.
DONE
1. From the Home display, press G (
Emissivity and RTC display.
) three times to navigate to the Adjust
MENU
dag118f.eps