Console & Handlebar - Fitness Quest Edge 491pr Owner's Manual

ASSEMBLY - Console & Handlebar
FIGURE 8
Step 18. Remove BATTERY DOOR of CONSOLE
(40) and insert four "C" SIZE BATTERIES
and replace BATTERY DOOR.
NOTE: DO NOT use rechargeable bat-
teries. Using rechargeable batter-
ies will cause a short circuit and
destroy CONSOLE (40).
IMPORTANT
Your monitor includes low grade batteries
that will operate the computer for display
purposes only. You will need to replace the
batteries shortly after using the bike for the
first few times.
40
CONSOLE
EXTENSION
WIRE
PULSE
WIRES
43
MACHINE
SCREW
SLOT
PICKUP
WIRE 31
M8
4
LOCKNUT
M8
WASHER
42
MACHINE
SCREW
PULSE
41
GRIP
FRONT
HANDLEBAR
39
CONSOLE
TUBE
FIGURE 9
FOUR "C" SIZE
BATTERIES
FIGURE 8
44
BOOK
HOLDER
FIGURE 9
Step 19. Insert PULSE WIRES from FRONT
HANDLEBAR (41) through HOLE in CON-
SOLE TUBE (39) and pull PULSE WIRES
up through top of CONSOLE TUBE.
Step 20. Attach FRONT HANDLEBAR (41), with
PULSE GRIPS up, to CONSOLE TUBE
(39) with MACHINE SCREWS (42), M8
PULSE
WASHERS (4), and M8 LOCKNUTS (31).
GRIP
NOTE: DO NOT pinch wires between
HANDLEBAR and CONSOLE
TUBE.
Step 21. Carefully plug PICKUP WIRE, EXTENSION
WIRE and PULSE WIRES into bottom of
CONSOLE (40).
Step 22. Remove MACHINE SCREWS (43) from
bottom of CONSOLE (40) and attach CON-
SOLE to CONSOLE TUBE (39) with MA-
CHINE SCREWS (43).
Step 23. Snap BOOK HOLDER (44) into SLOT in
CONSOLE (40).
9
BATTERY
DOOR
40
CONSOLE