Maintaining Your Machine - Savin 3699 Maintenance Manual

11. Maintaining Your Machine

Maintaining the Machine
If the parts mentioned below get
dirty, prints and copies may not come
out clearly. To ensure your machine
continues to produce the highest
quality printed output, we recom-
mend that you clean these parts peri-
odically.
Important
Do not use thinner, benzene, or al-
cohol based cleaning solutions.
Doing so may cause plastic parts to
become malformed or discolored.
This section describes how to clean
the following parts:
• Document Transport Mechanism
• Copy Paper Transport Mechanism
Cleaning the Document
Transport Mechanism
A
Open the ADF cover in the direc-
tion of the arrow.
B
Remove the feed unit.
Push it the direction of the arrow
A then pull it towards you to re-
move it B.
C
Rotate and wipe the separation
roller to make sure the entire sur-
face is clean.
Use a soft cloth that has been
dampened with water and wrung
out.
D
Return the feed unit to its original
position as shown.
TKSH050N
TKSM070N
TKSH090N
309