Table of Contents
Advertisement
16. A "Modem Setup" window appears, stating that the computer needs to be
restarted before the Modem can be used. Click OK.
17. After the computer has restarted, an "Install New Modem" window appears,
stating that the Modem has been set up successfully. Click Finish.
The Modem is now ready to use. To use the Modem to dial into a Windows NT
Remote Access server or connect to the Internet, configure "Dial Up Networking."
For more details, see the Windows NT documentation.
Chapter 3 Installing the Software
21
Advertisement
Table of Contents
