A&D TN-2655 Instruction Manual page 21

6. Lower the lever to the down position (1) .
Press the PAPER FEED switch again, and
confirm that the paper is cut automatically.
Lower the lever for cutting the paper.
Lower the lever for printing the
measurement data.
PAPER FEED switch
7. Remove the printer paper from the paper outlet, and
close the cover.
Press lightly on the center of the printer cover to secure it
in position.
With high-speed printing, about 700 printings can be performed.
With four-line printing, about 500 printings.
Replace the printer paper when the red end is reached.
Use the specified thermal paper, which is sold separately.
Note
Printer paper outlet
Note
Fig.11 Paper installation procedure
15
Lever
Lower the lever to the
down position (1) .