Operation Examples; Operation Example 1 - Mitsubishi Electric DX-TL4516E Installer Manual

Operation examples

Operation example 1

Specifying the recording period and performing continuous repeat recording.
For loading of a picture supplied from the camera,
recording rate settings" on page 126.
Operation
• Continues recording for 24 hours and repeats recording on a one-month (30-day) cycle.
• Makes the backup of the data simultaneously during recording.
Settings
[Recording settings]
Setup Menu
1 Recording
1
Set Recording Pattern A (Normal/Timer)
Camera Check
1
2+D
[Copy device settings]
System Menu
5 Memory
1 Add/Remove HDD Device
External HDD (USB HDD)
2
[Backup settings]
User Menu
2 Copy
Copy Data to Copy 2 Drive
2
4
Set Copy 2 Drive
When setting the total capacity of the copy 2 device (registering the device) to larger than that of the main device, all the
recorded data of the main device can be copied to the copy 2 device. In this operation example, the recorded data of more
than one month in the main device can be stored to the copy 2 device. You can prevent the accidental erasure of the re-
corded data caused by the crash of the main device.
84
Menu
Recording Setting A-Normal(Auto)
see "Relation of recording operation to the number of cameras and
Execute camera check to automatically
1.
step
detect the cameras with video signal input.
Use "Auto" to set "30 Day" and "24 hours" for
2.
step
"Recording cycle" and "Recording time per
day" respectively.
1
step
2
step
3. Register the multiple HDDs for SerialBus
step
group of Copy 2.
3
step
Set "To Copy 2" to "SerialBus," "FIFO
4.
step
Overwrite" to "On," and "Overwrite" to "Off."
5. Set "Range of Copy" to "Continue."
step
Select "Execute."
6.
step
5, 6
steps
4
step
Settings Pages
49-51
75
42