Menu Data; Load Menu Data; Save Menu Data - Mitsubishi Electric DX-TL4516E Installer Manual

Menu Data

This menu is used to update and save the menu settings of
this unit. This is done by loading the menu settings which is
copied from another DX-TL4516E/DX-TL4516E(Z) via the
external media such as USB memory, the DVD disc, or CD
available for this unit.
During loading or saving the menu data, other operations
are not accepted.
USB memory is usable only when the HDD is registered
for main device.

Load Menu Data

This item is used to update the menu settings of this unit by
loading the menu settings copied on the external media.
To load or change the menu settings stored on the
external media, set the HDD settings (partition setting) of
this unit to the same settings as the recorder which has
been used for copying the menu settings. When these
settings are different between this unit and the recorder
which has been used for copying, the menu settings
cannot be updated.
The menu setting cannot be updated by using the menu
data of which the format is different. (For example, the
construction of the menu has been changed due to the
addition of the function, etc.)
Setup Menu
5
Menu Data
1
Load Menu Data
1
Load Menu Device Selection
1. Select the device and the group to be used for
step
loading the menu settings.
2. Select "Eject" to eject the device.
step
• "Eject" appears only when the device selected
on step 1 can be ejected.
3. Select "Execute."
step
• The menu settings of this unit is updated and
"Menu settings data is loaded." appears on the
screen.
• When the medium to be used for loading the
menu is not prepared, "Media does not exist."
appears on the screen.
When loading the data with the setting of "IP Address,"
"Sub Net Mask," "Gateway," "Service Port Setting" of LAN
or menu language selection changed, the power turns off
automatically. Then this unit restarts.
The clock of the unit is not adjusted when the menu
loading is completed. Adjust the time setting.
Loading the menu data is available only while the unit
is in stop mode (not in playback, recording, backup, or
communication).

Save Menu Data

This item is used to save the menu settings of this unit to the
external device.
Setup Menu
5 Menu Data
2 Save Menu Data
1
1. Select the device and the group to be used for
step
saving the menu settings of this unit.
2. Select "Eject" to eject the device.
step
• "Eject" appears only when the device selected
on step 1 can be ejected.
3. Select "Execute."
step
• The menu settings are saved to the external
device.
• The menu can be saved even during playback
or recording.
• When completing saving, "Menu settings data is
saved." appears on the screen.
• When the medium to be used for saving the
menu is not prepared, "Media does not exist."
appears on the screen.
3
step
Loading or saving the menu data may take a few seconds
to start after selecting "Execute."
The menu items to be loaded or saved are marked with *
1, 2
steps
on the check list on
Setup Menu
Save Menu Device Selection
pages 110 to 125.
3
step
1, 2
steps
Operations
69