On Screen Display Setting; On Screen Information; Camera Title - Mitsubishi Electric DX-TL4516E Installer Manual

On Screen Display Setting

On Screen Information

This item is used to set the display mode and the location for
the clock, triplex, and camera display on the monitor.
Setup Menu
4
System
6
On Screen Display Setting
1 On Screen Information
[Clock]
1. Select the display mode of the clock.
step
Mode 1:
01-01-2006 Sun 00:00:00
Mode 2:
01-01-2006 Sun
00:00:00
Mode 3: Does not display the clock.
2. Select the desired clock location.
step
[Triplex]
3. Select the display mode of the remaining capacity
step
and the operational conditions such as playback,
recording, alarm recording, or emergency recording.
Mode 1: Displays the operational condition of the
unit and the warning display.
Mode 2: Displays the remaining capacity of the
specified device, the operational condition of the
unit, and the warning display.
Mode 3: Displays the remaining capacity of the
specified device, the operational condition of the
unit, and the HDD being used for playback or
recording. The warning display is not displayed.
Mode 4: Displays the warning display.
Mode 5: Displays nothing.
The remaining capacity displayed is the capacity of the
device specified in "Device" of "Low Memory Alarm Set-
ting." ( page 58)
The remaining capacity is not displayed when the "Device"
of "Low Memory Alarm Setting" is set to "Off."
4. Select the desired display location.
step
[Camera]
5. Select the display mode of the camera information.
step
Number: Displays the camera number.
Title: Displays the title set in "Camera Title." The
title can be recorded along with the picture.
None: Displays nothing.
6. Select the desired display location.
step
• When display mode is set to "Title," title is
displayed on the top when display location is set
to "Top - Left" or "Top - Right," and it is displayed
on the bottom when display location is set to
"Bottom - Left" or "Bottom - Right."
Display mode example
Recorder title
RECORDER1
REM 20% REC [A]
Specified device
Operational conditions
Remaining capacity of the specified device

Camera Title

This item is used to set the titles of each connected camera
individually. When the display mode of the camera informa-
tion is set to "Title," the title, showing the location of the cam-
era, appears on the screen for an easy-to-understand moni-
toring system.
The camera titles can be input via a personal computer
by using the Web function. (
Up to 16 characters can be used for the title.
The number of characters displayed on the screen is:
First 15 or all 16 for the split 16, 13, or 10 screen display
(varies depending on the display position)
All 16 for the split 4 or 9 screen display
Setup Menu
4 System
6 On Screen Display Setting
2 Camera Title
3
Camera Title Overview
D Camera Title Overview
1. Set the camera number for which the camera title is
step
set.
2. Input the camera title by using the characters shown
step
on the bottom of the screen.
3. Display the preview screen to check the settings
step
you have set.
Camera title
(during single screen display)
Warning
CAMERA1
ALERT
PLAY [SB:01] COPY1 COPY2
Specified device
page 101)
1, 2
steps
3
step
Operations
67