Table of Contents
Advertisement
4.18.3 Camera Window tab
[To display/hide the control buttons on the camera window]
Click the checkbox of each button to display or hide the buttons on the camera window.
[To change the image saving format of the scene capture function]
When you click the [Setting] button of [Scene capture setting], the following screen is displayed.
Select a file name under which the captured image is saved using the drop-down list of [Live] or [PB]. Then, select
the image saving format, either of [Bitmap] or [JPEG], using the drop-down list of [File format].
Notice
• Depending on the settings for naming files, more than one file having a same name may be created. Note that
this software doesn't provide any confirmation when a file is saved with an existing file name.
[To specify the instant replay time]
Using the drop-down list of [Preceding image play], specify the time to go back to retrieve a recorded image by
clicking the Recent Play button.
4.18.4 Camera List tab
[To set the patrol grouping]
You can set the switching sequence and interval used with the patrol function.
When you click [Grouping Name], the already registered groupings are shown in the drop-down list.
Arrange the groupings in the sequence you want to use with the patrol function.
You can include more than one same grouping in the sequence.
When clicking [Round time], you can change the interval between the groupings.
To delete a grouping from the list, select the grouping in the list and then click the Clear button.
When a short interval is used in a heavily loaded network environment with a PC with insufficient capacity,
groupings may be switched before live images are loaded and displayed completely.
– 38 –
Advertisement
Table of Contents
