Table of Contents
Advertisement
8 Appendix
8.1
Restrictions
• Functions supported by this software depend on the type of your Mitsubishi digital recorder. For models
supported by this software, see the section of "Compatible digital recorders" in this manual.
• If an operation problem should occur and you can't locate the cause of such problem in Mitsubishi digital
recorder or this software, other component equipment, cables, application software, or operation system, then
diagnose the problem by directly connecting Mitsubishi digital recorder to the personal computer containing this
software and the specified operation system using the specified devices (or equivalents thereof unless use of
such equivalents is questionable).
• The image refresh speed of this software depends on the CPU performance of your personal computer and
playback devices to be used. (The image refresh speed is affected by the network load during communication.)
Therefore, the playback speed of this software may be inconsistent with the recording interval of the digital
recorder.
• Media containing recorded data out of sequence may not be played back properly.
• The search functions may not work correctly depending on the recording condition of the searched media.
• Images or characters may not be printed correctly depending on the printer or printer driver to be used.
• This software occupies a large amount of memory to display or develop a lot of images. Don't run this software
with other application programs at the same time.
• The picture quality reproduced by this software depends on the picture quality settings applied at the time of
recording by the digital recorder, except when image sizes other than 100% are selected.
• When the digital recorder is used in combination with other network device on the network containing this
software, this software may not able to perform as specified. In such cases, divide the network.
• While any of the menu screens or on-screen display items of the digital recorder is being displayed on the
monitor, you can't load data from the digital recorder correctly. When loading data, keep the menu screens and
on-screen display items off.
• Some items on the menu screens of the digital recorder can't be disabled via network.
• If it takes longer than 30 seconds for the digital recorder to search for an image internally via network, such
image may not be loaded.
• If the data loading process via network is unstable, decrease the data transfer speed using the refresh speed
slider on the camera window panel.
• If the network function is used while images are being searched on the digital recorder's side, the search may
be interrupted. In addition, if images are searched on the digital recorder's side while the network function is in
use, the search may be interrupted.
• The specifications of this software are subject to change without notice.
– 49 –
Advertisement
Table of Contents
