Table of Contents
Advertisement
4.18 Option settings
Click the Option button on the main window.
4.18.1 General tab
[To display descriptions of buttons]
Click the checkbox next to [Display the control description] to put a checkmark. When you place the pointer on a
button, the description of the button is displayed. Descriptions of buttons are displayed only on active windows and
panels.
[To change the operation mode of this software]
Change the setting using the drop-down list of [Operation mode setting]. Select [Simple] to use this software in its
simple mode, and select [Full] to use it in its full-function mode.
[To change the data refresh interval]
Select a data refresh interval using the drop-down list of [Renew Info].
[To change the transparency of the window]
Move the slider of [Layered Window]. As the slider gets close to [Transparent], the transparency of the main
window, camera list window, Rec Panel Lite window, and grouping panel increases.
[To change the background image of each window]
Select a background image using the drop-down list of [Back Image]. Restart this software to enable the new
image you have selected.
4.18.2 Live/Playback tab
[To change the speed of forward search/reverse search]
Select a basic number of steps in search using the drop-down list of [Forward Search/Reverse Search]. In forward
or reverse search, recorded image fields are skipped by this number with one click. Every time the Field Advance
or Field Reverse button is clicked, the advance/reverse speed changes from x2 of basic number of steps in search
to x4, x8 and then back to x1.
Though the number of steps is selectable from the range between 1 and 1000, it may be limited depending on the
type of recorder.
[To enable automatic reconnecting]
When [Live Auto ReConnect] is set to [On], if the communication with the recorder should be interrupted for some
reason during loading of live images, this software repeats try to reconnect to the recorder for the number of times
specified by this option in order to continue loading live images.
Notice
• When the network is subjected to heavy load, the recorders require large amount of resources for
communication. To protect the recorders' fundamental functions (such as recording), communication with the
recorders may be intentionally interrupted in a heavy load environment. When automatic reconnecting is
repeated in a network environment where such interruption occurs frequently, it may adversely affect the
recorders' operation. Therefore, keep this function disabled in normal use.
– 37 –
Option button
Advertisement
Table of Contents
