Using The Basic Multiplexer Functions; Basic Multiplexer Functions; Multiplexer Buttons - Mitsubishi Electric DX-TL5000E User Manual

Using the basic multiplexer functions

Basic multiplexer functions

This function is used to perform the multiplexer functions
using the buttons on the front panel.
DIGITAL ZOOM button
SPLIT screen buttons
SEQUENCE button

Multiplexer buttons

1. Camera number buttons (1 to 16)
Displays the picture supplied from the cameras
connected to CAMERA IN terminals 1 to 16 on the rear
panel in the single screen display.
• Pictures can be displayed even if the camera is not
set for recording.
2. SPLIT screen buttons
Displays the split screen in the following order.
SPLIT4 ( ) button : SPLIT 4a SPLIT 4b
SPLIT9 ( ) button : SPLIT 9a SPLIT 9b
SPLIT10 ( ) button : SPLIT 10a SPLIT 10b
SPLIT13 ( ) button : SPLIT 13a SPLIT 13b
SPLIT16 ( ) button : SPLIT 16 screen
3. SEQUENCE button
Displays the sequential screen in the split screen or the
single screen display. Make the detailed settings of this
display in the <Multiplexer Setting> (Setup Menu
System Multiplexer Setting). Sequential display does
not appear during playback.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic operations
Camera number buttons
M-DET
DOT ON/OFF
M-DET
AREA SET UP
SPEED
OUTPUT A/B button
Move buttons
SPLIT 4c SPLIT 4d SPLIT 4a
• • •
SPLIT 9a • • •
SPLIT 10a • • •
SPLIT 13a • • •
• The sequential display is cancelled when the different
type of the split screen is displayed.
• Pressing the OUTPUT A/B button on the front panel
switches the multiplexer output of the unit. When
OUTPUT A is selected, the light of the button turns
off. When OUTPUT B is selected, the button lights up
and camera number buttons, SPLIT screen buttons,
and SEQUENCE button are operated for the monitor
screen connected to the OUTPUT B connector.
Pressing the OUTPUT A/B button again switches the
multiplexer output to OUTPUT A.
4. DIGITAL ZOOM button
Displays magnification 100% screen when pressing this
button during single screen display. At this time, the
magnification centre point (X) appears at the centre of
the screen. Pressing the button again switches the
magnification to 200%, and then 400%. By pressing the
MOVE buttons, the centre point moves vertically or
horizontally.
When the DIGITAL ZOOM button is pressed, camera
number buttons 11, 14, 15, and 16 become the MOVE
buttons.
11