Searching The Desired Picture; Basic Search; Search By Time And Date - Mitsubishi Electric DX-TL5000E User Manual

Searching the desired picture

Basic search

This function is used to search the start point of the desired
picture. This unit equipped with 5 search functions (Search
by Time and Date, Search by Alarm List, Find data storage
location, Search by Book Mark, and Search by Motion).
In this section, the common search methods, search by
time and date and search by alarm list, are described.

Search by Time and Date

This item is used to search the picture by specifying date,
hour, minute, second, and camera number to be searched.
The search result is displayed in still frame playback. When
searching for 1 camera number, the search result is
displayed in the single screen display. When searching
for 2 or more camera numbers, it is displayed in SPLIT16
screen.
User Menu
1 Search
Search by Time and Date
2
1. When you set the time and date to be searched
step
manually, select "Manual" and then set the date,
hour, minute, second, and camera number.
2. Select "Search."
step
3. When you search the start and end points of
step
recording, select "Start" and "End" respectively.
4. To playback the searched picture, press either the
step
PLAY button or the PAUSE button.
5. To stop playback or still frame playback, press the
step
STOP button.
• To change the device to be searched, set the desired
device in the <Select Source Device> (User
Menu Search Select Source Device).
• To display the single screen display of the desired
camera number when the search result is displayed
in the SPLIT16 screen, press the desired camera
number button.
• When there is no recording of the set time, the picture
of the closest time and date for the set camera
number is displayed in still frame.
• When the multiple recorded data of the same date
and time are existed, execute search by time and
date more than once until the desired picture is
searched.
• Depending on the recording condition, search by time
and date function may not operate correctly.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
16
• When changing the display from single to split or from
split to single during still frame playback, the recorded
picture may not be existed at a neighbourhood of that
point or picture may not be displayed depending on
the selected camera number or timing of displaying
the still frame playback picture.