Installing In The Portrait Position; Attaching The Corner Protectors - Mitsubishi Electric MDT70IS User Manual

P-2 Installing the monitor (continued)

Installing in the portrait position

The monitor can be installed in the portrait position.
Ensure that the monitor is oriented as shown below.
CAUTION:
• The operating environmental condition (temperature) when
the monitor is in the portrait position is 0˚C to 35˚C.
• Proper operation of the monitor is not guaranteed when it is
not mounted as shown below (upside down, face-up, face
down, etc.).
• When mounting an OPS-compliant computer (commercially
available), be sure to set COOLING FAN to ON using
SCREEN SAVER in the CONFIGURATION1 menu of the
OSD screen function. If it is set to AUTO, the life of the
computer may become shorter than that with it set to ON or
the computer may have trouble.
• In the portrait position, the lifetime of the backlight is
shorter than that in the landscape position.
Installation in the portrait position
The " " logo should be on the LEFT side when
viewed from the front of the monitor.
NOTE:
This monitor doesn't have a function to rotate displayed
images. To display images in the portrait orientation, use
already rotated images.
Landscape
90°
logo
Clockwise
Operation environment for portrait installation
When the monitor is installed in the portrait position, the
following conditions should be satisfi ed.
Temperature 0 - 35°C / 32 - 95°F
Humidity 20 - 80% (without condensation)

Attaching the corner protectors

CAUTION:
It is recommended to use the corner protectors (accessories).
When installing the monitor, hold its body fi rmly. If you hold the
monitor by the corner protectors when moving it, the monitor
may detaches and fall from the corner protectors, causing
injuries.
1. Attach the corner protectors using the accessory screws (c).
(c)
(c)
(c): Screw for attaching the corner protector (M3, 4 pcs.)
English-15
Carry out as necessary
Face-up
Face-down
Corner protector
(c)
(c)
(c)