Preparation For Use; Flow Of Preparation - Mitsubishi Electric MDT70IS User Manual

Preparation for use

Preparation for installation
P-1
- Determine the installation location
- Ventilation requirements for enclosure mounting
P-2
P-3
Connection procedure
P-4
- Wiring diagram
- Prevention of disconnection of HDMI cable
- Connecting with a computer (analog connection)
- Connecting with a computer (digital connection)
- Connecting a video device (component video/HDMI device)
- Connecting a video device (composite video/S video device)/stereo amplifi er
P-5
P-6
P-7
P-8
Connecting the power cord to the monitor
P-9
- Connecting the power source
The monitor is ready for use.

Flow of preparation

Carry out as necessary
Installing the monitor
- Using the wall mount or ceiling mount
- Preventing the handles from touching the wall
- Installing in the portrait position
- Attaching the corner protectors
- Using the monitor without the bezel
Carry out as necessary
Installing the optional speakers
Carry out as necessary
Installing the expansion module
- Installation of the expansion module
- SDI for long-distance connection or multiple-monitor connection
- Connecting OPS-compliant computer
Carry out as necessary
Connecting RS-232C
- Monitor control via RS-232C
Carry out as necessary
Connecting LAN
- Monitor connection using LAN
Carry out as necessary
Connecting a USB device
- Connecting multiple USB devices using the USB hub function
How to Use
Page 30
English-12
Page 13
Pages 14 to 16
Page 17
Pages 18 to 23
Pages 24 to 25
Page 26
Page 27
Page 28
Page 29