Installing In The Portrait Position - Mitsubishi Electric LDT422V User Manual

P-2 Installing the monitor (continued)

Installing in the portrait position

Conditions:
LDT422V can be installed in the portrait position, under the
following conditions:
CAUTION:
Portrait position is available only when the monitor is wall-
mounted or ceiling-mounted.
The stands (legs) can not be fi tted to the monitor in the portrait
position.
Placing the monitor in the portrait position will shorten the
average life of the LCD backlight.
Operation Environment (Temperature) shall be limited, as
shown below:
Operation Environment:
Temperature 5 - 35°C / 41 - 95°F
Humidity 20 - 80% (without condensation)
Place the monitor in the position shown below.
Do not place the monitor in landscape in any other manner than
shown.
Optional speakers (SP-422V) can not be attached when the
LCD monitor is installed in the portrait position.
How to set-up
The " " logo should be on the LEFT side when
viewed from the front of the monitor.
Landscape
90°
logo
Clockwise
English-15
Carry out as necessary