Basic Operation Of Osd - Mitsubishi Electric MDT70IS User Manual

Confi guration and basic operation of OSD screen (continued)
Check that the power indicator illuminates green and the monitor is powered on.
Step Wireless remote control
1
Press the MENU button to display the
OSD screen and then press the
button to select the main menu.
2
When you press the SET button to
accept the selected main menu, the
sub menu at the top is selected.
3
Press the / button to select a sub
menu.
4
Press the SET button to accept the
selected sub menu.
5
Press the / button to select the
setting and then press the SET button
to accept it.
The OSD screen disappears when you press the MENU button on the wireless remote control 1 time or the EXIT button on the
monitor 3 times after step 5.
NOTE:
Besides the example described above, some items are selected or adjusted by the PLUS (+) and MINUS (-) buttons.
Operate the buttons according to the control button guide displayed at the bottom of the OSD screen.

Basic operation of OSD

Monitor button
Press the EXIT button to display the
/ OSD screen and then press the
button to select the main menu.
When you press the INPUT button to
accept the selected main menu, the
sub menu at the top is selected.
Press the / button to select a sub
menu.
Press the INPUT button to accept the
selected sub menu.
Press the / button to select the
setting and then press the INPUT
button to accept it.
English-46
OSD screen display
/