Preparation For Use; Flow Of Preparation - Mitsubishi Electric LDT462V User Manual

Preparation for use

Preparation for installation
P-1
- Determine the installation location
- Ventilation requirements for enclosure mounting
- To avoid the monitor from falling
P-2
P-3
Connection procedure
P-4
- Wiring diagram
- Prevention of disconnection of HDMI cable
- Connecting with a computer (analog connection)
- Connecting with a computer (digital connection)
- Connecting a video device (component video/HDMI device)
- Connecting a video device (composite video/S video device)/stereo amplifi er
P-5
P-6
P-7
Connecting the power cord to the monitor
P-8
- Connecting the power source
The monitor is ready for use.

Flow of preparation

Carry out as necessary
Installing the monitor
- Installing and removing the stands (The stands are optionally available.)
- Using the wall mount or ceiling mount
- Installing in the portrait position
- Installing the main power switch cover
Carry out as necessary
Installing the external speakers (commercially available)
Carry out as necessary
Installing the extension module
- Installation of the extension module
- SDI for long-distance connection or multiple-monitor connection
- Connecting OPS-compliant computer
Carry out as necessary
Connecting RS-232C
- Monitor control via RS-232C
Carry out as necessary
Connecting LAN
- Monitor connection using LAN
How to Use
Page 27
English-12
Page 13
Pages 14 to 15
Page 16
Pages 17 to 21
Pages 22 to 23
Page 24
Page 25
Page 26