Projector Registration; Connection - Mitsubishi Electric LAN Control Utility User Manual

4. Projector registration

4.1. Connection

Connect the controller PC and the projector, which have installed "ProjectorView Global+", to a commercially
available LAN cable or wireless LAN adapter.
When connecting multiple projectors, use a commercially available hub.
• A LAN terminal or 802.11b/g/n wireless LAN adapter is required for the controller PC.
• Use a LAN cable compatible with Category 5 and 100BASE-T.
Both crossover and straight-through cables can be used.
(In the case of connection examples 5 and 6, see the instruction manual of the router.)
• Do not touch metal parts of the LAN terminal and LAN cable by hands charged of static electricity. Discharge
of static electricity may cause a failure of the projector.
• Up to 200 units of the projectors can be registered at the maximum.
<Note>
• The LAN function may be unavailable depending on the standby mode setting of the projector. To enable the
LAN function, change the setting referring to the User Manual of your projector.
• Some USB wireless adapters cannot be used for your projector depending on the specifications.
Connection example 1
Controller PC
Connection example 2
Controller PC
Connection example 3
Controller PC
Commercially available LAN cable
External hub
Commercially available LAN cable
Projector
Projector
EN-9
Projector