Timer - Mitsubishi Electric Mr.Slim Zuba Central User Manual

6. Timer

6.1. For Wired Remote-controller
You can use Function Selection of remote controller to select which of three types
of timer to use:
(1) Weekly timer,
(2) Simple timer, or
(3) Auto Off timer
6.1.1. Weekly Timer
The weekly timer can be used to set up to eight operations for each day of the
week.
• Each operation may consist of any of the following:
ON/OFF time together with a temperature setting, or
ON/OFF time only, or
Temperature setting only
• When the current time matches a set time point, the timer performs the set
operation.
Time setting resolution for this timer is one minute.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same time.
*2. The weekly timer will not operate when any of the following conditions are in
effect.
• The timer feature is off;
• The system is in a malfunction state;
• Test run is in progress;
• Remote controller is in self-check mode or remote controller check;
• the user is in the process of setting a function or setting the timer;
• the user is in the process of setting the current day of the week or time;
• System is under central control
Specifically, the system will not carry out operations (unit on, unit off or
temperature setting) during these conditions.
Page - 11 - of 23