Temperature Setting - Mitsubishi Electric Mr.Slim Zuba Central User Manual

Table of Contents

Advertisement

5.2. Mode select
Press the operation mode (
in [2] above.
Cool Mode
Drying mode
Fan mode
Heating mode
Automatic (cooling/heating) mode <Only heat pump type>
Ventilation mode
Only indicated on Wired remote controller when LOSSNAY
connected

5.3. Temperature setting

To decrease the room temperature:
Press button (3) to set the desired temperature. The selected temperature is
displayed [3].
To increase the room temperature:
Press button (3) to set the desired temperature. The selected temperature is
displayed [3].
• Available temperature ranges are as follows:
Cooling/Drying:
19 - 30 °C, 67 - 87 °F
Heating:
17 - 28 °C, 63 - 83 °F
Automatic:
19 - 28 °C, 67 - 83 °F
• The display blinks either 8 °C - 39 °C, 46 °F - 102 °F to inform you if the room
temperature is lower or higher than the displayed temperature.
5.4. Fan speed setting
Pressing the Fan Speed button will display the follow
"NOT AVAILABLE" message
The ZUBA Central has fixed speeds for Heating and Cooling.
) button and select the operation mode displays
Page 10 of 23

Hide quick links:

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents