Mitsubishi Electric Mr.Slim Zuba Central User Manual page 17

2. Press the Timer Menu button (12), so that the "Set Up" appears on the screen
(at [2]). (Note that each press of the button toggles the display between "Set Up"
and "Monitor".)
3. Press the ON/OFF button (1) to display the current ON or OFF simple timer
setting. Press the button once to display the time remaining to ON, and then
again to display the time remaining to OFF. (The ON/OFF indication appears at
[3]).
• "ON" timer: The air conditioner will start operation when the specified number of
hours has elapsed.
• "OFF" timer: The air conditioner will stop operation when the specified number
of specified number of hours has elapsed.
4. With "ON" or "OFF" showing at [3]: Press the appropriate Set Time button (11)
as necessary to set the hours to ON (if "ON" is displayed) or the hours to OFF (if
"OFF" is displayed) at [4].
• Available Range: 1 to 72 hours
5. To set both the ON and OFF times, repeat Steps 3 and 4.
* Note that ON and OFF times cannot be set to the same value.
6. To clear the current ON or OFF setting: Display the ON or OFF setting(see
step 3) and then press the Check (Clear) button(10) so that the time setting
clears to "—" at [4]. (If you want to use only an ON setting or only an OFF setting,
be sure that the setting you do not wish to use is shown as "—".)
7. After completing steps 3 to 6 above, press the Filter button (4) to lock in the
value.
Note: Your new settings will be cancelled if you press the Mode (Return) button
before pressing the Filter (4) button.
8. Press the Mode (Return) button (2) to return to the standard control screen.
9. Press the Timer On/Off button (9) to start the timer countdown. When the timer
is running, the timer value is visible on the display. Be sure that the timer value is
visible and appropriate.
<Viewing the Current Simple Timer Settings>
1. Be sure that the simple timer indicator is visible on the screen (at [1]).
2. Press the Timer Menu button (9), so that the "Monitor" appears on the screen
(at [5]).
• If the ON or OFF simple timer is running, the current timer value will appear at [6].
• If ON and OFF values have both been set, the two values appear alternately.
3. Press the Mode (Return) button (2) to close the monitor display and return to
the standard control screen.
Page - 17 - of 23