Table of Contents
Advertisement
ROOM TEMPERATURE DISPLAY SELECTION MODE (When you want to change room temperature display/no display)
• "88 °C" flashes at the room temperature display and "ON" or "OFF" lights. Each time the [Time selection (
state, the "ON" and "OFF" display is switched.
• When "ON" was selected, the room temperature is continuously displayed in the ON window.
• When "OFF" was selected, the room temperature is not displayed in the ON window.
3. At the end of selection of each function, release the remote controller function selection mode and display the OFF window by pressing the [CHECK]
and [Mode selection] buttons 1 at the same time for two seconds.
4
Specifications
Item
Size
Weight
Power requirement
Power consumption
Environmental conditions
Material
˚C
[Time selection (
) or (
120 (H) × 130 (W) × 19 (D) mm
0.2 kg
DC30 V Power supplied from M-NET transmission line (Normally, power is received from the outdoor unit over
the indoor/outdoor unit M-NET transmission line.)
0.5 W
Temperature 0 to 40 °C, humidity 30 to 90 % RH (No condensation)
PS
)] button
Contents
)] button 4 is pressed in this
) or (
˚C
7
Hide quick links:
Advertisement
Table of Contents
