Mitsubishi Electric PAR-F27MEA Instruction Book page 5

˚C
TEMP.
CLOCK→ON→OFF
3
TIMER SET
PAR-F27MEA
When setting the current time
■ Press the [Time selection] button 1 and display "CLOCK".
• Each time the button is pressed, the time is switched as shown below.
ON
CLOCK
■ Each time the [Time selection (
time returns one minute.
• When the button is held down, the time advances or returns continuously. The time changes in 1 minute units → 10 minutes units → 1 hour units order.
• About 10 seconds after the end of setting, the remote controller display goes off.
* When a power failure occurs, the current time is reset. Reset the clock.
When performing ON timer operation (1 day timer mode/daily timer mode)
■ Press the [Time selection] button 1 and check "Current time (CLOCK)" and display "Starting time (
■ Set the ON time by pressing the [Time selection (
■ Set the OFF time to "-- : --" display.
• "-- : --" display is displayed between 23 : 50 and 0 : 00.
■ Press the [Timer selection] button 3 and set the display to " " (1 day timer mode) or " " + "DAILY" (daily timer mode).
• Each time the button is pressed, the timer mode is switched as shown below.
Off
(1 day timer mode)
* The Auto off timer mode is skipped at the OFF window.
When performing OFF timer operation (1 day timer mode/daily timer mode)
■ Press the [Time selection] button 1 and check "Current time (CLOCK)" and set the display to "Ending time (
■ Set the OFF time by pressing the [Time selection (
■ Set the ON time to "-- : --" display.
■ Press the [Timer selection] button 3 and set the display to " " (1 day timer mode) or " " + "DAILY" (daily timer mode).
When performing ON/OFF timer operation (1 day timer mode/daily timer mode)
■ See the setting when performing ON timer and OFF timer operation and check "Current time (CLOCK)" and set both the ON time and OFF time.
■ Press the [Timer selection] button 3 and set the display to " " (1 day timer mode) or " " + "DAILY" (daily timer mode).
When performing AUTO OFF timer operation (AUTO OFF timer mode)
■ The Auto off timer can only be set while the air conditioner is operating.
■ Press the [Timer selection] button 3 and set the display to" " + "AUTO OFF" (Auto off timer mode).
■ Set the desired remaining time by pressing the [Time selection (
After remaining time setting, the timer automatically starts.
When releasing timer operation
■ Press the [Timer selection] button 3 and turn off the "TIMER" display.
Off
(1 day timer mode)
* The Auto off timer mode is skipped at the OFF window.
OFF
˚C
ON/OFF
1
FILTER
CHECK TEST
2
OFF
REMAINDER
)] button 2 is pressed, the time advances one minute and each time the [Time selection (
)] button 2.
) or (
DAILY
(Daily timer mode)
)] button 2.
) or (
DAILY
(Daily timer mode)
[Timer setting display example]
• 1 day timer mode
ON
• Daily timer mode
DAILY
• Auto off timer mode
AUTO OFF
REMAINDER
No display
AUTO OFF
(Auto off timer mode)
)] button 2. (30 minutes units, 30 minutes to 4 hours)
) or (
AUTO OFF
(Auto off timer mode)
← 1 day timer mode
8 A.M. operation start
OFF
← Daily timer mode
5 P.M. daily operation stop
← Auto off timer mode
Operation stop when 2 hours remain
)] button 2 is pressed, the
ON
)".
OFF
)".
5