Global Address - Acer WLAN 11g Broadband Router User Manual

4.3 Global Address

On the Global Address page, you can set up NAT (Network Address
Translation) to provide internal-to-external IP address mappings.
Notes :
If you want to use Global Address mapping, you must enable
NAT on the Filters page. For detailed instructions, see To Set up a
Port Filtering or Raw IP Filter.
If you have chosen to retrieve an IP address automatically, you
will not need to use this function. Instead, the default public IP
address will display on the Global Address page.
Have you enabled DMZ on the DHCP page? Depending on whether DMZ
is enabled, you may follow different procedural steps.
What do you want to do?
Set up Global Address with DMZ Disabled
▪
Set up Global Address with DMZ Enabled
▪
Remove Global Addresses
▪
4.3.1. To Set up Global Address with DMZ Disabled:
4.3.1.1. Click Global Address on the navigation bar.
The Global Address page with DMZ Disabled appears, seen in
FIGURE 4-5:
FIGURE 4-5: Global Address Page with DMZ Disabled
4.3.1.2. Review the first line in the above figure. It shows the default
WAN IP address which is specified on the Setup page. If your
11