Acer WLAN 11g Broadband Router User Manual page 14

the boxes, seen in FIGURE 4-3. You can collect such
information from your ISP.
FIGURE 4-3: WAN IP Address - Specify an IP Address
4.2.1.12. If your ISP uses PPPoE (Point to Point Protocol over Ethernet),
click Enable next to PPPoE Login; otherwise, click Disable.
For detailed instructions on how to set the PPPoE Login
parameters in FIGURE 3-4, see To Set PPPoE Login
Parameters below.
Notes :
Using PPPoE, your ISP can authenticate your connection with a
specific user name and password for security issues.
If you enable PPPoE, make sure to uninstall all existing applications
on any computer in your network
4.2.113. If you want to use UPNP (Universal Plug and Play) to plug
devices like PCs, routers and others into a network and to
automatically know about each other, click Enable next to
UPNP; otherwise, click Disable.
4.2.1.14. When you have completed all the settings, click Apply, or click
Cancel to undo your changes.
4.2.2. To Set PPPoE Login Parameters:
4.2.2.1. Click Enable next to PPPoE Login.
FIGURE 4-4: Set PPPoE Login Parameters
.
9