Feature Menu - Mitsubishi Electric DLP UD8850U User Manual

Menu operation (continued)

FEATURE menu

FEATURE
A
Ë
ITEM
PROJECTOR ID
GROUP ID
PASSWORD FUNCTION DISPLAY INPUT
MENU POSITION
CINEMA MODE
LANGUAGE
ADVANCED MENU
VIDEO SIGNAL
SETUP
SCART INPUT
LAMP WARNING
HIDE OSD
opt.
1 1 2 2
PROJECTOR ID ALL
GROUP ID A
PASSWORD FUNCTION
DISPLAY INPUT
MENU POSITION 1.
CINEMA MODE AUTO
LANGUAGE
English
ADVANCED MENU
ENTER
RESET ALL OK
SETTING
ALL
01 to 63
A to Z
/
/
MENU ACCESS
SPLASH ID SCREEN
1 (upper left) / 2 (lower right) /
3 (center)
AUTO
FILM
VIDEO
/ English / Español /
Deutsch / Français / Italiano /
/ / /
PORTUGUÊS / SVENSKA /
POLSKI / Nederlands/ Norsk /
ภาษาไทย
/ Türkçe /
/ Bahasa Indonesia / Melayu /
ENTER
AUTO / NTSC / PAL / SECAM
/ 4.43NTSC / PAL-M / PAL-N /
PAL-60
AUTO
OFF
3.75% / 7.5%
ON / OFF
STANDARD
SHORT TERM
OFF
ON
1 1 2 2
FEATURE
ADVANCED MENU
VIDEO SIGNAL
SETUP
SCART INPUT
LAMP WARNING
HIDE OSD
LAMP 1 TIME RESET
LAMP 2 TIME RESET
FILTER TIME RESET
FUNCTION
Select this option to control the projector regardless of the ID
number. (See page 62.)
Use to set the ID number (two-digit number). (See page 62.)
Use to set the ID number for controlling multiple projectors by
groups for monitoring and control via the SERIAL terminal. (See
page 62.)
Use to enable or cancel the password lock. See page 58 for details.
Use to change the position of the menu.
The film mode will be automatically activated when a film source
signal is input.
Select AUTO for normal use.
When flicker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select
either FILM or VIDEO, which improves the symptom better.
Fixed to the film mode.
The film mode will not be activated.
Use to select the language used in the menus.
The ADVANCED MENU is displayed for the following settings.
When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If the image
isn't displayed correctly, select the desired video format manually.
Select to change the SETUP mode automatically.
Select to make black lighter.
Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by the set-
up cancel function for the U.S. Choose OFF when the image is
dark.
Choose ON when connecting the projector with a device equipped
with the SCART terminal that can output RGB signal. SCART
terminal is used mainly in Europe. Choose OFF normally. (Available
only for the input signal from the COMPUTER/COMPONENT VIDEO
IN-1 terminal.)
When the lamp operating time exceeds 3000 hours with LAMP
MODE set to LOW, a warning dialog is displayed.
When the lamp operating time exceeds 3800 hours with LAMP
MODE set to LOW, a warning dialog is displayed.
Select this option for normal use.
The no-signal dialog, input dialog, SCART warning dialog, auto
power-off dialog, lamp warning dialog, and abnormal temperature
dialog aren't displayed.
EN-37
opt.
AUTO
AUTO
OFF
STANDARD
OFF
OK
OK
OK