Table of Contents
Advertisement
Communications by Web Browser
Communications by Web Browser
This unit can communicate with a PC via Web browser.
Live and pre-recorded images can be viewed from this
mode.
The personal computer product requirements
• OS: Microsoft Windows 98SE, Windows 2000,
Windows ME or Windows XP.
• CPU: IBM PC/AT compatible with an Intel Pentium series
processor of at least 500 MHz.
• RAM: 256 MB or more.
• Hard disk drive: System drive with unused space of at
least 200 MB.
• Web Browser Soft: Microsoft Internet Explorer 5.01SP2
or later.
• Display device: XGA (1024 pixels x 768 pixels) or higher.
Microsoft and Windows are registered trade-
marks of the Microsoft Corporation in the US and
other regions.
(The official name of Windows is Microsoft Windows
Operating System.)
All other company and product names appearing
herein are the property of their respective owners.
• Windows 98SE is an abbreviation of Microsoft
Windows 98 Second Edition.
• Windows 2000 is an abbreviation of Microsoft
Windows 2000 Professional.
• Windows Me is an abbreviation of Microsoft
Windows Millennium Edition.
• Windows XP is an abbreviation of Microsoft
Windows XP Home Edition/Professional.
The product requirement described above can-
not guarantee operations in all environments.
Lack of compatibility between Web functions and
the PC peripheral driver may, in rare instances, re-
sult in abnormal operation. If this happens, upgrade
to the newest version of Internet Explorer and try
again.
Connections
• When making a direct connection between this unit and a
personal computer (hereinafter PC), use a cross cable and
when making a connection through a HUB, use a straight
cable.
• The duplex mode is half duplex.
• Refer to the PC instruction manual for instructions on how
to set the Web settings on the PC.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
AUTHENTICATION
Start up the Microsoft Internet Explorer and log in.
1. Start up the Microsoft Internet Explorer and enter the IP
address of this unit.
• The "[Authentication]" screen appears.
2-1. (When logging in • • • )
First, enter the "userID" and then enter the "password." When
shipped from the factory, the userID for the full-rights user is
"root," and the password is "admin000," the userID for the
live user is "guest" and the password is "guest." Lower case
only.
More than one user can log in simultaneously
using the same userID and password.
There are restrictions due to authorization. The
maximum number of users that can be connected
at the same time is 10.
2-2. Select "log in" and then left-click or press ENTER.
• The "Welcome" screen appears.
73
Advertisement
Table of Contents
