Time Date/Display Settings; Time Date Adjust; Display Mode; Clock Location Setting - Mitsubishi Electric DX-NT430E Installation And Operation Manual

<TIME DATE/DISPLAY SETTINGS>

TIME DATE ADJUST

See page 24.

DISPLAY MODE

This item is used to set the display format of the date and
present time.
<TIME DATE/DISPLAY SETTINGS>
TIME DATE ADJUST
>>DISPLAY MODE

CLOCK LOCATION SETTING

CAMERA DISPLAY

CAMERA TITLE/MEMO SETTING

DUPLEX MODE DISPLAY
<MODE 1>
01-01-2004 00:00:00
Setting (default: "1")
"1": Displays the date/month/year and present time.
"2": Displays the date/month/year, day of the week,
present time, and recording interval (during single
screen playback only).
"3": Displays the date/month/year, day of the week,
present time, recording interval (during single screen
playback only), recorded capacity of HDD (during
recording/playback and when REMAIN HDD is set
to MAIN or SUB), and alarm recording number (dur-
ing alarm recording/playback).
"4": Displays nothing.
(When an alarm signal is input, displays the date/
month/year, day of the week, present time, and alarm
recording number (during alarm recording/
playback).)
"5": Displays nothing.
(When a warning signal is input, displays a warning
message.)
"6": Displays nothing.
<MODE1>
<MODE2>
<MODE3>
1. Press the SET UP button } <SETTINGS> } Select
"DISPLAY MODE" in the <TIME DATE/DISPLAY SETTINGS>
screen. Display the desired setting and determine such setting.
2. Press the CLEAR button or the SET UP button.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
34
NUMBER
BOTTOM
01-01-2004 00:00:00
01-01-2004 THU
00:00:00 12.5P
01-01-2004 THU
00:00:00 12.5P 99% A00001
CLOCK LOCATION SETTING
This menu is used to set the display position of the date
and present time.
1. Press the SET UP button } <SETTINGS> } Select
"CLOCK LOCATION SETTING" in the <TIME DATE/DISPLAY
SETTINGS> screen and then press the ENTER button.
• The <CLOCK LOCATION SETTING> screen appears.
••••••••••••••••••••••••••••••••
1
• 01-01-2004 00:00:00 ••••••••••
••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••
••••••••••••••••••••••••••••••••
2. Use the JOG , , ,
display to the desired position and then press the ENTER
button.
• The setting is determined.
3. Press the CLEAR button or the SET UP button.
CAMERA DISPLAY
This item is used to set the item to be displayed on the
screen.
Setting (default: "NUMBER")
"NUMBER": Displays the camera number only.
"TITLE": Displays the title set in "CAMERA TITLE/
MEMO SETTING." The title can be recorded along
with the video.
"COMMENT": Displays the comment set via RS-
232C connection.
"NONE": Displays nothing.
1. Press the SET UP button } <SETTINGS> } Select
"CAMERA DISPLAY" in the <TIME DATE/DISPLAY
SETTINGS> screen. Display the desired setting and determine
such setting.
2. Press the CLEAR button or the SET UP button.
CAMERA TITLE/MEMO SETTING
This item is used to set the titles of each connected camera
individually. When "CAMERA DISPLAY" is set to "TITLE,"
the title, such as the location of the camera, appears on
the screen for an easy-to-understand monitoring system.
Up to 16 characters can be used for the title. The
number of characters displayed on the screen is: All
16 for the single screen display and first 10 for the
SPLIT4 screen display.
buttons to move the date and time
<TIME DATE/DISPLAY SETTINGS>
TIME DATE ADJUST
DISPLAY MODE
CLOCK LOCATION SETTING
>>CAMERA DISPLAY
CAMERA TITLE/MEMO SETTING
DUPLEX MODE DISPLAY
<MODE 1>
01-01-2004 00:00:00
1
NUMBER
BOTTOM