Flowchart; Flowchart For Connection And Settings - Mitsubishi Electric DX-NT430E Installation And Operation Manual

Flowchart

Flowchart for connection and settings

Installation example:
Connect the terminals on the rear panel; and set the initial settings. Next, make an alarm recording using the timer
function, using alarm list search, and playback the searched data.
Connections
• Connect the terminals on the rear panel.
• Connection for the alarm recording.
• Connect the supplied wired remote control (R-400).
Attaching the HDD
• Attach the HDD to this unit.
Setting up the unit
• Test the HDD attached to the unit.
• Set up the unit using <AUTO SET UP> menu.
The unit boots-up.
Changing the initial menu settings
• Select the language.
• Set the present time and screen display.
• Set the present time.
• Set the display mode.
Setting the HDD (hard disk drive) mode
• Set the repeat recording.
See " HDD REPEAT REC MAIN/HDD REPEAT REC SUB" on page 47.
• Set the audio recording.
See "
• Set the remaining HDD capacity.
See "
• Set the CALL OUT.
See "• HDD MAIN REMAIN/HDD SUB REMAIN" on page 50, and "• HDD MAIN FULL/HDD SUB FULL" on page 51.
• Set the buzzer.
See "
Changing the multiplexer function
• Change the SPLIT4 screen setting.
See "
• Change the sequence setting.
See "
Setting other various functions
• Change the display mode.
See "
• Set the camera title/memo.
See "
• Set to output signals of the unit status.
See " MODE OUT 1 to MODE OUT 5" on page 49.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
6
See " Connecting to CCTV camera, monitor, and sensor" on page 12.
See " Alarm recording connection" on page 13, and " Rear view" on page 9.
See " Connecting the wired remote control R-400 (supplied)" on page 13.
See " Attaching and Removing the HDD" on pages 14 to 17.
See " HDD SELF TEST" on pages 18 and 19.
See " AUTO SET UP" on pages 20 and 21.
See " LANGUAGE SELECTION" on page 28.
See "<TIME DATE/DISPLAY SETTINGS>" on pages 34 and 35.
See " TIME DATE ADJUST" on page 24.
See " DISPLAY MODE" on page 34.
AUDIO RECORDING" on page 48, and "
REMAIN HDD" on page 50.
BUZZER" on pages 49 and 50.
SPLIT4 SCREEN SETTING" on page 37.
SEQUENCE SETTING" on page 37.
CLOCK LOCATION SETTING" on page 34, and "
CAMERA TITLE/MEMO SETTING"on pages 34 and 35, and "
Continuous recording time table" on page 79.
DUPLEX MODE DISPLAY" on page 35.
CAMERA DISPLAY" on page 34.