Mitel 5330e User Manual page 90

5330e/5340e IP Phones – User Guide
There are two LEDs associated with the cordless headset:

A blue LED on the headset indicates the headset status

A green LED in the headset charging cradle indicates battery status
LED Color
Blue
(on headset)
Green
(on cradle)
Blinking: LED is On and Off for equal amount of time
Winking: LED is On for a short period of time and Off for a longer period
LED State
Solid Headset microphone is muted
Blinking Headset is in pairing mode
Winking Active audio path between Headset and Module
Solid for 2 Pairing successful OR
seconds
New battery installed
Off No audio path between Headset and Module OR
Battery is dead
Solid Battery is fully charged
Blinking Battery is charging. Note: It is normal for the headset LED to cycle
between blinking and solid as battery charge is maintained.
Winking Indicates low voltage when headset is uncradled
Off When headset is cradled, indicates battery is not charging
Indicates
- 82 -