Table of Contents
Advertisement
6. When the message Setup Confirmation appears, press Enter again. The system
restarts.
To turn off the computer when the setup utility is open, press the
power switch .
Using the Setup Utility
To navigate through the different menus, you can use the following keys:
Use the Left and Right cursor arrow keys to choose the pages from the Main menu
bar to the Exit menu across the top of the screen.
Use the Up and Down cursor arrow keys to select the items on each page.
Use the Space bar, F6 key or Shift plus Plus keys to cycle forwards through the
values that can be installed for each item.
Use the Minus or F5 key to cycle backwards through the values that can be installed
for each item.
Use the Esc key to display the Exit page of the setup utility.
Use the F9 key to install the items of the setup utility with default values.
Use the F10 key to save the changes and exit the setup utility.
8
On items marked with a triangular pointer (!), press Enter to display a sub-menu.
Press Esc to close the sub-menu and return to the original page.
8-2
Advertisement
Table of Contents
