Using The Optional Port Replicator (May Not Be Available In Some Countries) - Sharp PC-AR10 Manual

Using the Optional Port Replicator
(may not be available in some countries)
The optional port replicator (model CE-DS03) provides a convenient "parking
place" for your computer on your desktop or working area. It duplicates the ports on
the rear side of your computer and adds extra ports as well. You can leave peripheral
devices permanently connected to the port replicator. When you dock your computer
to the replicator, all the devices are instantly available.
About the Port Replicator
The port replicator is a plug and play device. It supports cold and warm docking.
Cold docking means that you must turn off your computer before docking it to the
port replicator. Warm docking means that you must let your computer to System
Standby/Hibernate (press the hot keys Fn+F12) before docking it to the port
replicator. When you restart or resume your computer, Windows will automatically
configure the devices that are connected to the replicator and automatically assign
resources as they are required.
Disconnect
button
Speakers
Disconnect
Guide pin
lever
Disconnect
button
Guide pin
Docking
connector
6-3
6