Maytag Chambers CMO-2743 Use And Care Manual page 28

To Start the Self-Clean Cycle
1. Follow steps under "Before Starting the Self-Clean Cycle."
2. Check to see that the digital clock is set at the correct time of day.
If not, reset to the correct time following the instructions on page
9. Push in and turn Start Time Control (3) until it "pops out" and
shows the same time as the oven clock
NOTE: The self-clean cycle can be set to start at a later time
automatically. Set the Start Time Control to the desired start
time and the Stop Time Control to the desired stop time.
Lock Lever
3.
Close door.
4. Determine length of cleaning time needed from chart below. Push
in and turn the Stop Time Control (4) to the hour cleaning should
stop.
CLEAN Soil Description
TIME
Moderate Soil
GUIDE
Heavy Soil
Set Stop Time Ahead
2 hours
3 hours
5. 'IWn the Selector (2) and Thermostat (1) to "CLEAN."
6. Slide Oven Lock Lever all the way to the right. You will hear a
loud click. The clean cycle will now begin.
28