Selecting The Signal Type - Sharp XV-Z10000 Operation Manual

Selecting the Signal Type

This function allows you to select the input signal type RGB or Component for INPUT 1 and
2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component,
Analog RGB or Analog Component for INPUT 5.
Selecting the Signal
Type
Select "Signal Type" in the "Options"
menu on the menu screen.
➝For operating the menu screen, see
pages 40 to 43.
Note
For INPUT 1 and INPUT 2
Set when RGB signals are
RGB received from video equip-
ment.
Set when analog component
Component signals are received from
video equipment.
For INPUT 5
Set when digital PC RGB
D. PC RGB signals are received from
the computer.
Set when digital PC com-
ponent signals are re-
D. PC Comp.
ceived from the com-
puter.
Set when digital video
RGB signals are re-
D. Video RGB
ceived from video equip-
ment.
Set when digital video
component signals are
D. Video Comp.
received from video
equipment.
Set when analog RGB
A. RGB
signals are received.
Set when analog compo-
A. Comp. nent signals are re-
ceived.
The input signal type can also be switched
by pressing . This switching at this time
is only able to be performed for switching
the of the above table.
For INPUT 1 and INPUT 2
For INPUT 5
RGB/COMP. button
-65