Setting The Reception Mode - Sharp UX-BA50 Operation Manual

Setting the Reception Mode

Setting the Reception Mode
The machine has four modes for receiving incoming faxes:
FAX mode:
Select this mode when you only want to receive faxes on your line. The fax
machine will automatically answer all calls and receive incoming faxes.
TEL mode:
This mode is the most convenient for receiving phone calls. Faxes can also be
received; however, all calls must first be answered by picking up the fax's
handset or an extension phone connected to the same line.
TEL/FAX mode:
This mode is convenient for receiving both faxes and voice calls. When a call
comes in, the fax will detect whether it is a voice call (including manually
dialled faxes), or an automatically dialled fax. If it is a voice call, the fax will
make a special ringing sound to alert you to answer. If it is an automatically
dialled fax, reception will begin automatically.
A.M. mode:
Select this mode when you go out and want the built-in answering machine to
answer all calls. Voice messages will be recorded, and fax messages will be
received automatically. (Note: A.M. mode cannot be selected unless an
outgoing message has been recorded as explained on page 35.)
Setting the reception mode
RECEPTION
Press
REC/MEMO
Digital Answering System
For more information on receiving faxes in FAX, TEL and TEL/FAX modes,
see Chapter 4. For more information on using A.M. mode, see Chapter 2.
30
until the arrow in the display points to the desired mode.
RECEPTION
RECEPTION
PLAY INK
TEL/FAX A.M.
RESO.
REPEAT SKIP DELETE DIGITAL
SPEAKERPHONE
RECEPTION
Z A
TEL FAX
01-JAN 10:30
TEL/FAX A.M.
TEL FAX
01-JAN 10:30
TEL/FAX A.M.
TEL FAX
01-JAN 10:30
TEL/FAX A.M.
TEL FAX
01-JAN 10:30
TEL/FAX A.M.