Sharp UX-BA50 Operation Manual page 11

Arrow keys
7
Use these keys to scroll through and select settings, and to search for auto-
dial numbers (page 64).
FUNCTION key
8
Press this key followed by the arrow keys to select special functions and
settings.
Number keys
9
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
REPEAT key
10
Press this key while listening to a message to play it again.
SKIP key
11
Press this key while listening to a message to skip to the next message.
DELETE key
12
Press this key to erase recorded messages.
POLL key
13
Press this key after dialling another fax machine to receive a document
(previously loaded in the other machine's feeder) without assistance from the
operator of the other machine (page 92).
HOLD key
14
Press this key to put the other party on hold during a phone conversation
(page 78).
DIGITAL SPEAKERPHONE key
15
Press this key to talk with the other party through the speakerphone during a
call (speak facing the operation panel at a distance of about 50 cm to 1m;
page 68). This key can also be used to listen to the line and fax tones through
the speaker when faxing a document (page 59).
STOP key
16
Press this key to cancel an operation before it is completed.
START/MEMORY key
17
Press this key after dialling to begin fax transmission (page 60). Press this key
before dialling to send a fax through memory (page 70). The key can also be
pressed in the date and time display to show the percentage of memory
currently used.
9