Connecting The Telephone Line Cord - Sharp UX-BA50 Operation Manual

Connecting the Telephone Line Cord

Connecting the Telephone Line Cord
Insert one end of the telephone line cord into the adapter. Insert the other end
of the line cord into the socket on the back of the machine marked TEL. LINE.
Plug the adapter into the telephone socket on the wall.
For Australia
For New Zealand
Setting the dial mode
The fax machine is set for tone dialling. If you are on a pulse dial line, you
must set the fax machine for pulse dialling. Press the panel keys as follows:
1
Press
2
Press once and
3
Press once.
4
Select the dial mode:
TONE:
5
Press
Note: For all units installed in New Zealand, select "1" for tone dialling. The pulse
setting "2" will not operate correctly and must not be used.
24
once and 3 times.
4 times.
PULSE:
to exit.
Display:
OPTION SETTING
DIAL MODE
1=TONE, 2=PULSE
The display briefly shows
your selection, then:
PSEUDO RING