If You Cannot Make Copies As You Want - Savin 4022 Operating Instructions Manual

Troubleshooting

If You Cannot Make Copies As You Want

This section explains causes of, and remedies for, unexpected copy results.
❖ ❖ ❖ ❖ Basic
Problem
Copies are not stapled.
3
Staples are wrongly posi-
tioned.
You cannot combine sever-
al functions.
When sorting, the pages
are divided into two
blocks.
Paper does not output dur-
ing printing with stapling.
78
Causes
There are jammed staples
in the stapler.
The number of copies ex-
ceeds stapler capacity.
Copy paper is curled.
Originals are not placed
correctly.
Selected functions cannot
be used together.
The memory became full in
the middle of sorting and
the pages were delivered in
two blocks.
If you stop printing while
using the staple function,
sheets not stapled during
printing may be left in the
staple unit.
Solutions
Remove jammed staples. See Gener-
al Settings Guide.
Note
❒ After removing jammed staples,
staples might not eject the first
few times you try to use the sta-
pler.
Check the stapler capacity. See p.110
"Staple".
Turn the copy paper over in the
tray.
Check originals are placed in the
correct position. See p.40 "Staple".
Check the combination of functions
and make the settings again.
See p.105 "Combination Chart".
You can interrupt copying when
memory becomes full. See p.103
"Memory Full Auto Scan Restart".
Press the { { { { Clear Modes} } } } key and can-
cel copy settings, including stapling.