Savin 4022 Operating Instructions Manual page 121

• When using this function, the following limitations apply. When the num-
ber of copies exceeds tray capacity, copying stops. When this happens, re-
move copies from the shift tray, and then resume copying.
500-sheet finisher
1000-sheet finisher
*1
To load paper of sizes 7
and 10" × 15"L, use paper tray 2.
• In the following cases, copies are delivered to the shift tray without sta-
pling:
• When the number of sheets for one set is over stapler capacity.
• When memory reaches 0% during copying.
• When the number of copies exceeds tray capacity, copying stops. If this
happens, remove the copies from the shift tray, and then resume copy-
ing.
• You cannot change stapling positions during copying.
• When the original image is rotated, staple orientation changes by 90°.
• The maximum original image size that can be rotated is as follows:
Metric version
Inch version
• When using [Left 2] or [Top 2] with the Combine function, Double Copies,
or Auto Reduce/Enlarge, the "Blank part will appear. Check orientation."
message may appear. If this happens, change the paper orientation.
• When [Left 2] or [Top 2] is selected, the following settings are useful to rotate
images appropriately:
• Auto Reduce/Enlarge or Auto Paper Select
• With image rotation in Auto Tray Switching of User Tools
Paper size
A3L, B4 JISL, 11" × 17"L,
11" × 15"L, 11" × 14"L, 10"
× 14"L, 10" × 15"L, 8
" × 13"L
1
14"L, 8 /
2
A4KL, B5 JISK, 8
11"KL, 8" × 10 "K, 8" ×
1
/
2
" × 10
1 1
10"K, 7 / /
4 2
A3L, B4 JISL, 11" × 17"L,
11" × 15"L, 11" × 14"L, 10"
× 14"L, 10" × 15"L, 8
" × 13"L, 8
1
14"L, 8 /
2
" × 13"L, 8" ×
1
14"L, 8 /
4
13"L
A4KL, B5 JISKL, 8
11"KL, 8" × 10
1
/ "KL, 8"
2
× 10"KL, 7 " ×
1
/
4
1
10 / "KL
2
" × 10 "L, 8" × 10"KL, 11" × 15"L, 10" × 14"L,
1 1
/ /
4 2
A4
" × 11"
1
8 /
2
Supplementary Specifications
Stapler capacity
20 sheets (80 g/m
" ×
1
/
2
" ×
1
/ 30 sheets (80 g/m
2
"K
30 sheets (80 g/m
" ×
1
/
2
" ×
1
/
4
" ×
1
/ 50 sheets (80 g/m
2
2
)
2
)
2
)
5
2
)
111