Turning The Power On - Roland ADA-7000 Owner's Manual

Turning the Power On

* Once the connections have been completed (p. 11), turn on power to your various devices in the
order specified. By turning on devices in the wrong order, you risk causing malfunction and/or
damage to speakers and other devices.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is
required before the unit will operate normally.
1.
Make sure that the volume of the audio devices have been turned
down.
2.
Turn on the power of the ADA-7000.
3.
Turn on the power of the devices connected to the R-BUS connector.
4.
Set the master clock (sampling clock) of the ADA-7000 and of the
devices connected to the R-BUS connector of the ADA-7000.
5.
Raise the volume of the audio equipments.
12