Note - Roland ADA-7000 Owner's Manual

ADA-7000 setting
Check if the clock source on the ADA-7000 is set to R-BUS. When the ADA-7000 is booted up, the clock source is set
to R-BUS.
* Refer to ADA-7000 Owner's Manual p. 6 "Clock source."
VSR-880 setting
Set the master clock of the VSR-880 to INTERNAL as follows.
1. Press [SYSTEM] while holding [SHIFT]. "SYS System PRM?" appears in the display.
2. Press [ENT/YES].
3. Select SYS MasterClk= INT with TIME/VALUE dial, then press [ENT/YES].
* Refer to VSR-880 Owner's Manual p. 108 "Select the Master Clock."
* If you set the clock source differently, please refer to the
ADA-7000 Owner's Manual p. 6 "Clock source" and the VSR-880 Owner's Manual p. 108 "Select the Master
Clock."

Note

* DIF-AT Interface Box cannot be used even if connected to the ADA-7000 via R-BUS.
Supplementary Notes
19