Flying Saw with SIMOTION
•
Sequence phases when changing from the "disable" to "manual"
•
Sequence phases when changing from the "starting position" to
"disable"
•
Sequence phases when changing from the "starting position" to "error"
•
Sequence phases when changing from the "starting position" to
"automatic"
•
Sequence phases when changing from the "automatic" to "disable"
•
Sequence phases when changing from the "automatic" to "starting
position"
•
Sequence phases when changing from the "manual" to "disable"
•
Sequence phases in "automatic" operation.
•
Maximum length of the SyncPos buffer
Static variables
•
Description of the data structure of the TO parameters
•
Description of the data structure of the user interface with the geometry,
machine data and control bits
•
Description of the data structure of the error interface with the error IDs
of the state change and the RetDINT and FR values of the system
commands.
•
Description of the data structure of the internal data area of the
FlyingSaw FBs. Under no circumstances may users change these
values.
•
Description of the data structure to manage synchronous positions.
•
Description of the data structure for time calculations within the
FlyingSaw FBs
•
Description of the data structure of the synchronous position detection
using measuring function.
10.3
Functions of the FB_BGD_Template_FlyingSaw()
("FlyingSaw-FB")
10.3.1
Declarations
•
Input interface
•
Input/output interface
•
Output interface
•
Internal program data
V 1.4
Description of important program elements
Release 06/06/08
Section D: Program description
A4027118-A0414
89/107