Integrating The Template Block In The Processing Sequence - Siemens Simotion A4027118-A0414 User Manual

Flying Saw with SIMOTION
Assigning the instance
In the calling user program, the function block
"FB_BGD_TEMPLATE_FlyingSaw()" must be assigned an instance. The
following table includes examples in ST and FBD.
Table 7-6 Generating an instance of the "FB_BGD_TEMPLATE_FlyingSaw()"
ST
FUP
7.6.2

Integrating the template block in the processing sequence

The core "flying saw" function is integrated in the processing sequence
using a simple function block call and transferring the required parameters.
This call strategy corresponds to that of PLC-Open standard function
blocks.
V 1.4
Section C: Integrating the core "flying saw" functions
Integrating the core "flying saw" functions
Instance
Release 06/06/08
A4027118-A0414
80/107